EE-SY193

Omron Electronics Inc-EMC Div EE-SY193

Part No:

EE-SY193

Datasheet:

EE-SY193

Package:

4-SMD, No Lead

ROHS:

AINNX NO:

6029933-EE-SY193

Description:

SENSOR OPTO TRANS 1MM SMD

Products specifications
  • Factory Lead Time
    11 Weeks
  • Package / Case
    4-SMD, No Lead
  • Mounting Type
    Surface Mount
  • Mount
    Surface Mount
  • Number of Pins
    4
  • Number of Elements
    1
  • Collector-Emitter Breakdown Voltage
    18V
  • Published
    2003
  • Packaging

    Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

    Tape & Reel (TR)
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -30°C~80°C
  • Pbfree Code
    yes
  • Part Status

    Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

    Active
  • Moisture Sensitivity Level (MSL)
    1 (Unlimited)
  • Body Length or Diameter
    3.35mm
  • Body Breadth
    2.65 mm
  • Output Type
    Phototransistor
  • Termination Type
    SOLDER
  • Power Dissipation

    the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

    75mW
  • Output Current

    The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

    20mA
  • Forward Current

    Current which flows upon application of forward voltage.

    25mA
  • Response Time

    the time taken for a circuit or measuring device, when subjected to a change in input signal, to change its state by a specified fraction of its total response to that change.

    25μs, 30μs
  • Rise Time

    In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

    25μs
  • Forward Voltage

    the amount of voltage needed to get current to flow across a diode.

    1.1V
  • Fall Time (Typ)
    30 μs
  • Collector Emitter Voltage (VCEO)
    18V
  • Max Collector Current
    20mA
  • Sensing Distance

    It is the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation. (Normally, it is 70 to 80 % of the maximum operation distance.)

    0.039 (1mm)
  • Reverse Breakdown Voltage
    6V
  • Reverse Voltage

    the voltage drop across the diode if the voltage at the cathode is more positive than the voltage at the anode

    6V
  • Wavelength
    940 nm
  • Sensing Method
    Reflective
  • Max Breakdown Voltage
    18V
  • Sensors/Transducers Type
    LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE
  • Max Supply Voltage (DC)
    1.3V
  • Body Height
    0.95mm
  • RoHS Status

    RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

    RoHS Compliant
  • REACH SVHC
    Unknown
0 Similar Products Remaining
Documents & Media Download datasheets and manufacturer documentation for Omron Electronics Inc-EMC Div EE-SY193.