ON Semiconductor FAN7380MX

Lifecycle Status

ACTIVE (Last Updated: 21 hours ago)

Factory Lead Time

14 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

8-SOIC (0.154, 3.90mm Width)

Number of Pins

8

Weight

142.994995mg

Driver Configuration

Half-Bridge

Logic voltage-VIL, VIH

0.8V 2.5V

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

190 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~150°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Published

2006

JESD-609 Code

e4

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

8

ECCN Code

EAR99

Terminal Finish

Nickel/Palladium/Gold (Ni/Pd/Au)

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

625mW

Voltage - Supply

10V~20V

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Number of Functions

1

Supply Voltage

15V

Base Part Number

FAN7380

Number of Outputs

2

Output Voltage

620V

Max Output Current

The maximum current that can be supplied to the load.

180mA

Power Supplies

an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

15V

Voltage

10V

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

610μA

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

625mW

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

180mA

Max Supply Current

610μA

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

50 ns

Input Type

Non-Inverting

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

200 ns

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

230ns

Fall Time (Typ)

90 ns

Rise / Fall Time (Typ)

230ns 90ns

Channel Type

Independent

Gate Type

IGBT, N-Channel MOSFET

Current - Peak Output (Source, Sink)

90mA 180mA

Max Junction Temperature (Tj)

150°C

Turn Off Time

0.19 µs

Built-in Protections

OVER CURRENT; UNDER VOLTAGE

High Side Voltage - Max (Bootstrap)

600V

Ambient Temperature Range High

This varies from person to person, but it is somewhere between 68 and 77 degrees F on average. The temperature setting that is comfortable for an individual may fluctuate with humidity and outside temperature as well. The temperature of an air conditioned room can also be considered ambient temperature.

125°C

Height

1.85mm

Length

4.9mm

Width

3.9mm

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

Lead Free

Lead Free