FSBB15CH60C
27-PowerDIP Module (1.205, 30.60mm)
5050448-FSBB15CH60C
FAIRCHILD SEMICONDUCTOR FSBB15CH60C IGBT Array & Module Transistor, N Channel, 15 A, 2 V, 55 W, 600 V, SPM27-CC
It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.
Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.
The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.
HTS (Harmonized Tariff Schedule) codes are product classification codes between 8-1 digits. The first six digits are an HS code, and the countries of import assign the subsequent digits to provide additional classification. U.S. HTS codes are 1 digits and are administered by the U.S. International Trade Commission.
The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.
The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.
In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.
The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.
Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.
the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.
The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.
Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.
Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.
RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.
FSBB15CH60C-ON-Semiconductor-datasheet-86696836.pdf
FSBB15CH60C-ON-Semiconductor-datasheet-137330151.pdf
FSBB15CH60C-Fairchild-datasheet-619849.pdf
FSBB15CH60C-ON-Semiconductor-datasheet-22148888.pdf
FSBB15CH60C-ON-Semiconductor-datasheet-86690722.pdf
FSBB15CH60C-Fairchild-Semiconductor-datasheet-17852640.pdf
FSBB15CH60C-ON-Semiconductor-datasheet-93662985.pdf