ON Semiconductor H11L1SR2M

Lifecycle Status

ACTIVE (Last Updated: 3 days ago)

Factory Lead Time

5 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

6-SMD, Gull Wing

Number of Pins

6

Weight

810mg

Number of Elements

1

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

1.2 μs

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Published

2008

JESD-609 Code

e3

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

ECCN Code

EAR99

Additional Feature

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

UL RECOGNIZED

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

250mW

Voltage - Supply

3V~15V

Supply Voltage

16V

Frequency

1MHz

Voltage - Isolation

4170Vrms

Output Voltage

16V

Output Type

Open Collector

Max Output Current

The maximum current that can be supplied to the load.

50mA

Configuration

SINGLE

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

250mW

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

50mA

Voltage - Forward (Vf) (Typ)

1.2V

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

4 μs

Input Type

DC

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

1 μs

Optoelectronic Device Type

LOGIC IC OUTPUT OPTOCOUPLER

Forward Current

Current which flows upon application of forward voltage.

10mA

Max Output Voltage

The maximum output voltage refers to the dynamic area beyond which the output is saturated in the positive or negative direction, and is limited according to the load resistance value.

16V

Data Rate

Data Rate is defined as the amount of data transmitted during a specified time period over a network. It is the speed at which data is transferred from one device to another or between a peripheral device and the computer. It is generally measured in Mega bits per second(Mbps) or Mega bytes per second(MBps).

1 MBps

Direction

Unidirectional

Output Current per Channel

50mA

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

100ns

Fall Time (Typ)

100 ns

Max Collector Current

5mA

Rise / Fall Time (Typ)

100ns 100ns

Reverse Breakdown Voltage

6V

Reverse Voltage

the voltage drop across the diode if the voltage at the cathode is more positive than the voltage at the anode

6V

Current - DC Forward (If) (Max)

30mA

Input Current

10mA

On-State Current-Max

0.05A

Propagation Delay tpLH / tpHL (Max)

4μs, 4μs

Inputs - Side 1/Side 2

1/0

Max Junction Temperature (Tj)

125°C

Reverse Voltage (DC)

6V

Hysteresis Ratio-Nom

0.75

Height

4.8mm

Length

8.89mm

Width

8.51mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free