LM358DR2G

ON Semiconductor LM358DR2G

Part No:

LM358DR2G

Manufacturer:

ON Semiconductor

Package:

8-SOIC (0.154, 3.90mm Width)

ROHS:

AINNX NO:

7870189-LM358DR2G

Description:

IC OPAMP GP 1MHZ 8SOIC

Products specifications
  • Lifecycle Status
    ACTIVE (Last Updated: 2 days ago)
  • Factory Lead Time
    11 Weeks
  • Contact Plating

    Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

    Tin
  • Mounting Type
    Surface Mount
  • Package / Case
    8-SOIC (0.154, 3.90mm Width)
  • Surface Mount

    having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

    YES
  • Number of Pins
    8
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    0°C~70°C
  • Packaging

    Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

    Tape & Reel (TR)
  • Published
    2005
  • JESD-609 Code
    e3
  • Pbfree Code
    yes
  • Part Status

    Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

    Active
  • Moisture Sensitivity Level (MSL)
    1 (Unlimited)
  • Number of Terminations
    8
  • ECCN Code
    EAR99
  • Packing Method
    TR
  • Terminal Position
    DUAL
  • Terminal Form

    Occurring at or forming the end of a series, succession, or the like; closing; concluding.

    GULL WING
  • Peak Reflow Temperature (Cel)
    260
  • Number of Functions
    2
  • Supply Voltage
    5V
  • Time@Peak Reflow Temperature-Max (s)
    40
  • Base Part Number
    LM358
  • Pin Count

    a count of all of the component leads (or pins)

    8
  • Operating Supply Voltage

    The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

    16V
  • Power Supplies

    an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

    +-1.5/+-15/3/30V
  • Number of Channels
    2
  • Operating Supply Current
    1.5mA
  • Nominal Supply Current

    Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

    1.2mA
  • Output Current

    The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

    40mA
  • Slew Rate

    the maximum rate of output voltage change per unit time.

    0.6V/μs
  • Architecture
    VOLTAGE-FEEDBACK
  • Amplifier Type
    General Purpose
  • Common Mode Rejection Ratio
    65 dB
  • Current - Input Bias
    45nA
  • Voltage - Supply, Single/Dual (±)
    3V~32V ±1.5V~16V
  • Halogen Free
    Halogen Free
  • Output Current per Channel
    40mA
  • Input Offset Voltage (Vos)
    7mV
  • Voltage Gain
    100dB
  • Average Bias Current-Max (IIB)
    0.5μA
  • Power Supply Rejection Ratio (PSRR)
    65dB
  • Low-Offset
    NO
  • Frequency Compensation

    Frequency compensation is implemented by modifying the gain and phase characteristics of the amplifier's open loop output or of its feedback network, or both, in such a way as to avoid the conditions leading to oscillation. This is usually done by the internal or external use of resistance-capacitance networks.

    YES
  • Voltage - Input Offset
    2mV
  • Dual Supply Voltage
    9V
  • Height
    1.5mm
  • Length
    5mm
  • Width
    4mm
  • REACH SVHC
    No SVHC
  • Radiation Hardening

    Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

    No
  • RoHS Status

    RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

    ROHS3 Compliant
  • Lead Free
    Lead Free
0 Similar Products Remaining
Documents & Media Download datasheets and manufacturer documentation for ON Semiconductor LM358DR2G.