MC14066BDR2G
14-SOIC (0.154, 3.90mm Width)
7525021-MC14066BDR2G
ON SEMICONDUCTOR MC14066BDR2G QUAD BILATERAL SWITCH, SOIC-14
Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.
having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.
It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.
The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.
Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.
Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.
The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.
Occurring at or forming the end of a series, succession, or the like; closing; concluding.
The center distance from one pole to the next.
a count of all of the component leads (or pins)
an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?
Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.
the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.
the flight time of packets over the transmission link and is limited by the speed of light.
Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.
High-level Output Current IOH The current flowing into the output at a specified high- level voltage. Low-level Output Current IOL The current flowing into the output at a specified low- level output voltage.
The current into the output terminal with input conditions applied that, according to the product specification, will establish a low level at the output.
A voltage source is a two-terminal device which can maintain a fixed voltage. An ideal voltage source can maintain the fixed voltage independent of the load resistance or the output current. However, a real-world voltage source cannot supply unlimited current. A voltage source is the dual of a current source.
Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.
RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.
MC14066BDR2G-ON-Semiconductor-datasheet-156410.pdf
MC14066BDR2G-ON-Semiconductor-datasheet-41315542.pdf
MC14066BDR2G-ON-Semiconductor-datasheet-11629402.pdf
MC14066BDR2G-ON-Semiconductor-datasheet-21398961.pdf
MC14066BDR2G-ON-Semiconductor-datasheet-8313864.pdf
Quantity
Unit Price
Ext. Price
1+
$34.132353
$34.09
10+
$32.200334
$322.06
100+
$30.377674
$3,037.70
500+
$28.658182
$14,329.14
1000+
$27.036016
$27,035.96
* The above prices does not include taxes and freight rates, which will be calculated on the order pages.