ON Semiconductor MC74HC4051ADR2G

Lifecycle Status

ACTIVE (Last Updated: 4 days ago)

Factory Lead Time

32 Weeks

Mounting Type

Surface Mount

Package / Case

16-SOIC (0.154, 3.90mm Width)

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

YES

Number of Pins

16

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

160 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C~125°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Published

2005

JESD-609 Code

e3

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

16

Resistance

190Ohm

Terminal Finish

Tin (Sn)

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

500mW

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Supply Voltage

4.5V

Time@Peak Reflow Temperature-Max (s)

40

Base Part Number

MC74HC4051A

Pin Count

a count of all of the component leads (or pins)

16

Polarity

Non-Inverting

Number of Channels

8

Number of Circuits

1

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

6V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

2V

Analog IC - Other Type

SINGLE-ENDED MULTIPLEXER

Operating Supply Current

40μA

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

4μA

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

500mW

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

75 ns

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

245 ns

Logic Function

Demultiplexer, Demux, Multiplexer, Mux

Number of Inputs

8

Voltage - Supply, Single/Dual (±)

2V~6V ±2V~6V

Halogen Free

Halogen Free

Supply Type

Dual, Single

Neg Supply Voltage-Nom (Vsup)

-4.5V

Max Dual Supply Voltage

A Dual power supply is a regular direct current power supply. It can provide a positive as well as negative voltage. It ensures stable power supply to the device as well as it helps to prevent system damage.

6V

On-State Resistance (Max)

100Ohm

Min Dual Supply Voltage

1V

Multiplexer/Demultiplexer Circuit

8:1

Off-state Isolation-Nom

40 dB

Current - Leakage (IS(off)) (Max)

200nA

Channel Capacitance (CS(off), CD(off))

130pF

On-state Resistance Match-Nom

18Ohm

Channel-to-Channel Matching (ΔRon)

10 Ω

Switching

BREAK-BEFORE-MAKE

Switch-off Time-Max

76ns

Signal Current-Max

0.025A

Length

9.9mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free