Pepperl GD18-S/GV18-S/73/120

Package / Case

Axial

Mount

Through Hole

Supplier Device Package

Axial

Housing Material

PC

RoHS

Compliant

Maximum Operating Temperature

the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

+60°C

Minimum Operating Temperature

-25°C

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C ~ 155°C

Series

RNF

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Size / Dimension

0.071 Dia x 0.130 L (1.80mm x 3.30mm)

Tolerance

±1%

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Number of Terminations

2

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

±100ppm/°C

Resistance

35.7 Ohms

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

60 °C

Min Operating Temperature

-25 °C

Composition

Metal Film

Power (Watts)

0.125W, 1/8W

Output Type

PNP

Failure Rate

the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.

--

Response Time

the time taken for a circuit or measuring device, when subjected to a change in input signal, to change its state by a specified fraction of its total response to that change.

<=1 ms

Light Source

an optical transmitter that is paired with an optical receiver, both of which are connected to electrically based devices or systems.

LED

Features

Flame Retardant Coating, Safety

Electrical Connection

M12 4 Pin Connector

IP Rating

IP (or "Ingress Protection") ratings are defined in international standard EN 6529 (British BS EN 6529:1992, European IEC 659:1989). They are?used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies?(tools, dirt etc) and moisture.

IP67

Height Seated (Max)

--

Ratings

IP67