Power Integrations TNY285PG

Factory Lead Time

4 Weeks

Mounting Type

Through Hole

Package / Case

8-DIP (0.300, 7.62mm), 7 Leads

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

NO

Number of Pins

7

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~150°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Series

TinySwitch®-4

Published

2015

JESD-609 Code

e3

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

7

Terminal Finish

MATTE TIN

Power (Watts)

8.5W

Additional Feature

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

SEATED_HT CALCULATED

Power Rating

11.5W

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

15W

Terminal Position

DUAL

Number of Functions

1

Terminal Pitch

The center distance from one pole to the next.

2.54mm

Number of Outputs

1

Output Voltage

265V

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

265V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

85V

Analog IC - Other Type

ANALOG CIRCUIT

Operating Supply Current

440μA

Output Power

That power available at a specified output of a device under specified conditions of operation.

15W

Control Features

EN

Topology

Flyback

Min Input Voltage

85V

Frequency - Switching

124kHz~140kHz

Max Input Voltage

265V

Internal Switch(s)

Yes

Fault Protection

Protection against electric shock under. single fault conditions.

Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit

Max Duty Cycle

67 %

Output Isolation

Isolated

Voltage - Breakdown

725V

Min Input Voltage (AC)

85V

Max Input Voltage (AC)

265V

Length

9.44mm

Height Seated (Max)

4.06mm

Width

6.35mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant