Renesas Electronics America 2SJ687-ZK-E1-AY

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

TO-252-3, DPak (2 Leads + Tab), SC-63

Transistor Element Material

SILICON

Current - Continuous Drain (Id) @ 25℃

20A Tc

Drive Voltage (Max Rds On, Min Rds On)

2.5V 4.5V

Number of Elements

1

Power Dissipation (Max)

1W Ta 36W Tc

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

270 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

150°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Published

2007

JESD-609 Code

e3

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Obsolete

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

2

ECCN Code

EAR99

Terminal Position

SINGLE

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Pin Count

a count of all of the component leads (or pins)

3

JESD-30 Code

R-PSSO-G2

Configuration

SINGLE WITH BUILT-IN DIODE

Operating Mode

A phase of operation during the operation and maintenance stages of the life cycle of a facility.

ENHANCEMENT MODE

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

1W

Case Connection

DRAIN

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

36 ns

FET Type

P-Channel

Transistor Application

SWITCHING

Rds On (Max) @ Id, Vgs

7m Ω @ 10A, 4.5V

Input Capacitance (Ciss) (Max) @ Vds

4400pF @ 10V

Gate Charge (Qg) (Max) @ Vgs

57nC @ 4.5V

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

220ns

Drain to Source Voltage (Vdss)

20V

Vgs (Max)

±12V

Polarity/Channel Type

N-CHANNEL

Fall Time (Typ)

310 ns

Continuous Drain Current (ID)

20A

JEDEC-95 Code

TO-252AA

Gate to Source Voltage (Vgs)

12V

Drain Current-Max (Abs) (ID)

0.02A

Drain-source On Resistance-Max

0.02Ohm

DS Breakdown Voltage-Min

20V

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free