HW112

Samtec HW112

Part No:

HW112

Manufacturer:

Samtec

Datasheet:

-

Package:

-

AINNX NO:

45651576-HW112

Description:

METAL FILM RESISTOR, 120 OHM, 0.5W, 2%, Resistance:120ohm, Product Range:Metal Film Resistor, Power Rating:500mW, Resistance Tolerance:± 2%, Resistor Case Style:Axial Leaded, Voltage Rating:350V, Resistor Element Type:Metal Film RoHS Compliant: Yes

Products specifications
  • Mount
    Surface Mount
  • Number of Terminals
    2
  • RoHS
    Compliant
  • Package Style
    Axial
  • Manufacturer Part Number
    HW112
  • Manufacturer
    NTE Electronics Inc
  • Part Life Cycle Code
    Active
  • Package Diameter
    3.76 mm
  • Ihs Manufacturer
    NTE ELECTRONICS INC
  • Package Length
    9.02 mm
  • Risk Rank
    1.35
  • Tolerance
    2%
  • ECCN Code
    EAR99
  • Temperature Coefficient

    The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

    100 ppm/°C
  • Resistance
    120 Ω
  • Max Operating Temperature

    The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

    85 °C
  • Min Operating Temperature
    -30 °C
  • Subcategory
    Fixed Resistors
  • Technology
    METAL OXIDE FILM
  • Construction
    Flameproof
  • Resistor Type
    FIXED RESISTOR
  • Reach Compliance Code
    unknown
  • Frequency
    26 MHz
  • Frequency Stability

    the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

    15 ppm
  • Rated Power Dissipation (P)
    0.5 W
  • ESR (Equivalent Series Resistance)
    60 Ω
  • Working Voltage
    350 V
  • Load Capacitance

    the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

    8 pF
  • Frequency Tolerance

    the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

    0.001 %
  • Width
    1.6002 mm
  • Height
    457.2 µm
  • Length
    2.0066 mm
  • Ratings
    AEC-Q200
0 Similar Products Remaining