28911

Schneider 28911

Part No:

28911

Manufacturer:

Schneider

Datasheet:

-

Package:

-

AINNX NO:

35728804-28911

Description:

NON AUTOMATIC SWITCH INTERPACT INS125 12

Products specifications
  • Housing Material
    Stainless Steel
  • Body Material
    Stainless Steel
  • Manufacturer Part Number
    8320G041-24/60
  • Approvals
    CSA;UL;CE
  • Manufacturer
    Asco
  • Voltage, Rating
    250 V dc, 690V ac
  • Maximum Operating Temperature

    the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

    +70°C
  • Minimum Operating Temperature
    -25°C
  • Type of electrical connection of main circuit
    Screw connection
  • Rated operating voltage
    690 - 690
  • Number of auxiliary contacts as normally open contact
    0
  • Degree of protection (IP), front side
    IP40
  • Device construction
    Built-in device fixed built-in technique
  • Rated permanent current Iu
    125
  • Type of control element
    Long turning handle
  • Number of auxiliary contacts as normally closed contact
    0
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    200 Degrees F
  • Power Rating
    75kW
  • Supply Voltage
    24 VAC
  • Depth
    62.5mm
  • Number of Poles
    4P
  • Terminal Type

    Terminal type or emulation specifies how your computer and the host computer to which you are connected exchange information.

    Screw
  • Power Consumption

    Power consumption is the amount of input energy (measured in watts) required for an electrical appliance to function. This is opposed to power output which is a measure of the level of performance, of a heat pump for example.

    10.1 Watts
  • Orifice Diameter

    An orifice plate is a device used for measuring flow rate, for reducing pressure or for restricting flow (in the latter two cases it is often called a restriction plate).

    0.062,5 Inches
  • IP Rating

    IP (or "Ingress Protection") ratings are defined in international standard EN 6529 (British BS EN 6529:1992, European IEC 659:1989). They are?used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies?(tools, dirt etc) and moisture.

    IP40
  • Width
    100mm
  • Length
    135mm
0 Similar Products Remaining