Silicon Labs SI4432-B1-FM

Factory Lead Time

8 Weeks

Mounting Type

Surface Mount

Package / Case

20-VFQFN Exposed Pad

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

YES

Number of Pins

20

Weight

42.949528mg

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tray

Published

2000

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Not For New Designs

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

20

Type

TxRx Only

Voltage - Supply

1.8V~3.6V

Terminal Position

QUAD

Number of Functions

1

Supply Voltage

3V

Terminal Pitch

The center distance from one pole to the next.

0.5mm

Depth

4mm

Frequency

240MHz~930MHz

Pin Count

a count of all of the component leads (or pins)

20

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

3V

Max Supply Current

85mA

Power - Output

20dBm Max

RF Family/Standard

General ISM < 1GHz

Data Rate (Max)

256kbps

Serial Interfaces

A serial interface is a communication interface between two digital systems that transmits data as a series of voltage pulses down a wire. Essentially, the serial interface encodes the bits of a binary number by their "temporal" location on a wire rather than their "spatial" location within a set of wires.

SPI

Current - Receiving

18.5mA

Modulation

FSK, GFSK, OOK

Sensitivity (dBm)

-121 dBm

GPIO

3

Height

850μm

Length

4mm

Width

4mm

REACH SVHC

Unknown

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant