SI8234BB-D-IS1
16-SOIC (0.154, 3.90mm Width)
1519484-SI8234BB-D-IS1
SILICON LABS SI8234BB-D-IS1Digital Isolator, 2 Channel, 30 ns, 4.5 V, 5.5 V, NSOIC, 16 Pins
It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.
The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.
Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.
Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.
The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.
Occurring at or forming the end of a series, succession, or the like; closing; concluding.
a count of all of the component leads (or pins)
An indicator of formal certification of qualifications.
The maximum current that can be supplied to the load.
In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.
The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.
The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.
the flight time of packets over the transmission link and is limited by the speed of light.
Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.
In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.
RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.