74LCX32TTR
14-TSSOP (0.173, 4.40mm Width)
4882274-74LCX32TTR
IC GATE OR 4CH 2-INP 14-TSSOP
Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.
Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.
The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.
Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.
Occurring at or forming the end of a series, succession, or the like; closing; concluding.
The center distance from one pole to the next.
a count of all of the component leads (or pins)
an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?
the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.
the flight time of packets over the transmission link and is limited by the speed of light.
The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.
Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.
The number of gates per IC varies depending on the number of inputs per gate. Two?input gates are common, but if only a single input is required, such as in the 744 NOT(or inverter) gates, a 14 pin IC can accommodate 6 (or Hex) gates.
RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.
Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.