STMicroelectronics M24C16-MN6

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

8-SOIC (0.154, 3.90mm Width)

Number of Pins

8

Memory Types

Non-Volatile

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

JESD-609 Code

e0

Pbfree Code

no

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Obsolete

Moisture Sensitivity Level (MSL)

3 (168 Hours)

Number of Terminations

8

ECCN Code

EAR99

Terminal Finish

Tin/Lead (Sn/Pb)

Voltage - Supply

4.5V~5.5V

Terminal Position

DUAL

Peak Reflow Temperature (Cel)

NOT SPECIFIED

Number of Functions

1

Supply Voltage

5V

Terminal Pitch

The center distance from one pole to the next.

1.27mm

Reach Compliance Code

not_compliant

Time@Peak Reflow Temperature-Max (s)

NOT SPECIFIED

Base Part Number

M24C16

Pin Count

a count of all of the component leads (or pins)

8

Qualification Status

An indicator of formal certification of qualifications.

Not Qualified

Supply Voltage-Max (Vsup)

5.5V

Power Supplies

an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

5V

Supply Voltage-Min (Vsup)

4.5V

Interface

2-Wire, I2C, Serial

Memory Size

The memory capacity is the amount of data a device can store at any given time in its memory.

16Kb 2K x 8

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

2mA

Operating Mode

A phase of operation during the operation and maintenance stages of the life cycle of a facility.

SYNCHRONOUS

Clock Frequency

400kHz

Access Time

900ns

Memory Format

EEPROM

Memory Interface

An external memory interface is a bus protocol for communication from an integrated circuit, such as a microprocessor, to an external memory device located on a circuit board.

I2C

Output Characteristics

OPEN-DRAIN

Memory Width

8

Write Cycle Time - Word, Page

5ms

Density

16 kb

Standby Current-Max

0.000001A

Serial Bus Type

I2C

Endurance

1000000 Write/Erase Cycles

Write Cycle Time-Max (tWC)

5ms

Data Retention Time-Min

40

Write Protection

HARDWARE

I2C Control Byte

1010MMMR

Length

4.9mm

Height Seated (Max)

1.75mm

Width

3.9mm

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant