STMicroelectronics STGE200NB60S

Lifecycle Status

ACTIVE (Last Updated: 8 months ago)

Factory Lead Time

8 Weeks

Mounting Type

Chassis Mount

Package / Case

SOT-227-4, miniBLOC

Mount

Chassis Mount, Panel, Screw

Number of Pins

4

Weight

28.349523g

Transistor Element Material

SILICON

Number of Elements

1

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

2.4 μs

Collector-Emitter Breakdown Voltage

600V

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C~150°C TJ

Series

PowerMESH™

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

4

ECCN Code

EAR99

Terminal Finish

Nickel (Ni)

Voltage - Rated DC

600V

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

600W

Terminal Position

UPPER

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

UNSPECIFIED

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

150A

Base Part Number

STGE200

Pin Count

a count of all of the component leads (or pins)

4

Configuration

Single

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

600W

Case Connection

ISOLATED

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

64 ns

Transistor Application

POWER CONTROL

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

112ns

Drain to Source Voltage (Vdss)

600V

Polarity/Channel Type

N-CHANNEL

Input

Standard

Collector Emitter Voltage (VCEO)

600V

Max Collector Current

200A

Continuous Drain Current (ID)

200A

Current - Collector Cutoff (Max)

500μA

Input Capacitance

The capacitance between the input terminals of an op amp with either input grounded. It is expressed in units of farads.

1.56nF

Turn On Time

The time that it takes a gate circuit to allow a current to reach its full value.

170 ns

Vce(on) (Max) @ Vge, Ic

1.6V @ 15V, 100A

Turn Off Time-Nom (toff)

4600 ns

NTC Thermistor

resistors with a negative temperature coefficient, which means that the resistance decreases with increasing temperature.

No

Gate-Emitter Voltage-Max

20V

Input Capacitance (Cies) @ Vce

1.56nF @ 25V

VCEsat-Max

1.6 V

Width

25.5mm

Height

9.1mm

Length

38.2mm

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free