STGIPL14K60
38-PowerDIP Module (1.146, 29.10mm)
5050294-STGIPL14K60
STMICROELECTRONICS STGIPL14K60 IGBT Array & Module Transistor, N Channel, 15 A, 600 V, 44 W, SDIP
It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.
Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.
The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.
The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.
a count of all of the component leads (or pins)
In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.
The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.
The distribution of electrons of an atom or molecule (or other physical structure) in atomic or molecular orbitals.
Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.
The time that it takes a gate circuit to allow a current to reach its full value.
Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.
RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.