TDA2030AV
Pentawatt-5 (Vertical, Bent and Staggered Leads)
4771157-TDA2030AV
STMICROELECTRONICS TDA2030AV. Audio Power Amplifier, 18 W, 5 Pins
The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.
Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.
Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.
The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.
a count of all of the component leads (or pins)
The maximum current that can be supplied to the load.
Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.
the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.
The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.
The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.
That power available at a specified output of a device under specified conditions of operation.
the maximum rate of output voltage change per unit time.
The gain–bandwidth product (designated as GBWP, GBW, GBP, or GB) for an amplifier is the product of the amplifier's bandwidth and the gain at which the bandwidth is measured.
The actual voltage at which a circuit operates can vary from the nominal voltage within a range that permits satisfactory operation of equipment. The word “nominal” means “named”.
A Dual power supply is a regular direct current power supply. It can provide a positive as well as negative voltage. It ensures stable power supply to the device as well as it helps to prevent system damage.
The maximum output power = the maximum output current × the rated output voltage
Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.
RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.
TDA2030AV-STMicroelectronics-datasheet-10836425.pdf
TDA2030AV-STMicroelectronics-datasheet-36384.pdf
TDA2030AV-STMicroelectronics-datasheet-654994.pdf
TDA2030AV-STMicroelectronics-datasheet-33008915.pdf
TDA2030AV-STMicroelectronics-datasheet-101433.pdf
TDA2030AV-STMicroelectronics-datasheet-8318.pdf
TDA2030AV-STMicroelectronics-datasheet-8215223.pdf
TDA2030AV-STMicroelectronics-datasheet-9939142.pdf