STMicroelectronics VIPER22ADIP-E

Lifecycle Status

ACTIVE (Last Updated: 8 months ago)

Factory Lead Time

20 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mount

Surface Mount, Through Hole

Mounting Type

Through Hole

Package / Case

8-DIP (0.300, 7.62mm)

Number of Pins

8

Weight

4.535924g

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~150°C TC

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Series

VIPER™

JESD-609 Code

e3

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

8

ECCN Code

EAR99

Power Rating

20W

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

12W

Terminal Position

DUAL

Number of Functions

1

Terminal Pitch

The center distance from one pole to the next.

2.54mm

Frequency

60kHz

Base Part Number

VIPER22

Pin Count

a count of all of the component leads (or pins)

8

Output Voltage

730V

Input Voltage-Nom

18V

Number of Channels

1

Analog IC - Other Type

SWITCHING REGULATOR

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

4.5mA

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

700mA

Voltage - Supply (Vcc/Vdd)

8V~38V

Max Supply Current

5mA

Output Power

That power available at a specified output of a device under specified conditions of operation.

12W

Topology

Flyback

Min Input Voltage

195V

Control Mode

CURRENT-MODE

Max Input Voltage

265V

Control Technique

PULSE WIDTH MODULATION

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

50ns

Fall Time (Typ)

100 ns

Switcher Configuration

SINGLE

Threshold Voltage

16V

Internal Switch(s)

Yes

Fault Protection

Protection against electric shock under. single fault conditions.

Current Limiting, Over Temperature, Over Voltage

Max Duty Cycle

16 %

Output Isolation

Isolated

Voltage - Start Up

14.5V

Min Input Voltage (AC)

195V

Max Input Voltage (AC)

265V

Height

2.92mm

Length

9.02mm

Width

7.11mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free