FK2125256BL-T

TAIYO YUDEN FK2125256BL-T

Part No:

FK2125256BL-T

Manufacturer:

TAIYO YUDEN

Datasheet:

-

Package:

0805 (2012 Metric), 4 PC Pad

AINNX NO:

68554951-FK2125256BL-T

Description:

LINE FILTER SMD

Products specifications
  • Mounting Type
    Surface Mount
  • Package / Case
    0805 (2012 Metric), 4 PC Pad
  • Package
    Tape & Reel (TR)
  • Mfr
    Taiyo Yuden
  • Product Status
    Obsolete
  • Resistance - Channel (Ohms)
    2
  • Voltage Rated

    RATED voltage is the voltage on the nameplate - the "design point" for maximum power throughput and safe thermal operation.

    10V
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -25°C ~ 85°C
  • Series
    FK
  • Size / Dimension
    0.079 L x 0.049 W (2.00mm x 1.25mm)
  • Temperature Coefficient

    The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

    100.0000 ppm/°C
  • Type
    Low Pass
  • Resistance
    3.16 kOhm
  • Applications
    Data Lines for Mobile Devices
  • Power Rating
    0.5 W
  • Technology
    LC (T-Type)
  • Resistor Type
    Industrial
  • Number of Channels
    1
  • Current
    100 mA
  • ESD Protection
    No
  • Resistance Tolerance

    Tolerance is the percentage of error in the resistor's resistance, or how much more or less you can expect a resistor's actual measured resistance to be from its stated resistance. A gold tolerance band is 5% tolerance, silver is 10%, and no band at all would mean a 20% tolerance.

    1
  • Attenuation Value

    Attenuation is the loss of signal strength in networking cables or connections. This typically is measured in decibels (dB) or voltage and can occur due to a variety of factors. It may cause signals to become distorted or indiscernible.

    20dB @ 500MHz
  • Filter Order

    The order of a filter also indicates the minimum number of reactive components that the filter will require. For example, a third-order filter requires at least three reactive components one capacitor and two inductors, two capacitors and one inductor, or in the case of an active filter, three capacitors.

    3rd
  • Values
    -
  • Center / Cutoff Frequency
    25MHz (Cutoff)
  • Product Length
    6.1
  • Height
    0.047 (1.20mm)
0 Similar Products Remaining