Texas Instruments CD74HC4511M

Lifecycle Status

ACTIVE (Last Updated: 6 days ago)

Factory Lead Time

6 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Gold

Mounting Type

Surface Mount

Package / Case

16-SOIC (0.154, 3.90mm Width)

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

YES

Number of Pins

16

Weight

141.690917mg

Number of Elements

1

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C~125°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

JESD-609 Code

e4

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

16

ECCN Code

EAR99

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

114mW

Voltage - Supply

2V~6V

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Supply Voltage

4.5V

Base Part Number

74HC4511

Pin Count

a count of all of the component leads (or pins)

16

Number of Outputs

7

Polarity

Non-Inverting

Supply Voltage-Max (Vsup)

6V

Supply Voltage-Min (Vsup)

2V

Configuration

7 Segment

Interface

BCD

Operating Supply Current

8μA

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

50pF

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

4mA

Number of Bits

7

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

60 ns

Quiescent Current

The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

8μA

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

450 ns

Family

HC/UH

Min Input Voltage

2V

Logic Function

Decoder, Demultiplexer

Number of Inputs

4

Max Input Voltage

6V

Bandwidth

28MHz

Logic IC Type

SEVEN SEGMENT DECODER/DRIVER

Max I(ol)

0.0052 A

Display Type

LED

High Level Output Current

High-level Output Current IOH The current flowing into the output at a specified high- level voltage. Low-level Output Current IOL The current flowing into the output at a specified low- level output voltage.

-10mA

Low Level Output Current

The current into the output terminal with input conditions applied that, according to the product specification, will establish a low level at the output.

5.2mA

Power Supply Current-Max (ICC)

0.08mA

Input Conditioning

LATCHED

Digits or Characters

1 Digit

Height

1.75mm

Length

9.9mm

Width

3.91mm

Thickness

1.58mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free