PCA9545APWR
20-TSSOP (0.173, 4.40mm Width)
4360458-PCA9545APWR
TEXAS INSTRUMENTS - PCA9545APWR - ANALOG MULTIPLEXER, QUAD 4 X 1 TSSOP-20
Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.
having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.
Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.
Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.
The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.
The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.
Occurring at or forming the end of a series, succession, or the like; closing; concluding.
The center distance from one pole to the next.
a count of all of the component leads (or pins)
Temperature grades represent a tire's resistance to heat and its ability to dissipate heat when tested under controlled laboratory test conditions.
the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.
Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.
the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.
the flight time of packets over the transmission link and is limited by the speed of light.
The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.
Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.
RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.
PCA9545APWR-Texas-Instruments-datasheet-26769738.pdf
PCA9545APWR-Texas-Instruments-datasheet-148864.pdf
PCA9545APWR-Texas-Instruments-datasheet-21256272.pdf
PCA9545APWR-Texas-Instruments-datasheet-5388452.pdf
PCA9545APWR-Texas-Instruments-datasheet-8453140.pdf
PCA9545APWR-Texas-Instruments-datasheet-125453.pdf