Texas Instruments RC4558P

Lifecycle Status

ACTIVE (Last Updated: 2 days ago)

Factory Lead Time

6 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Gold

Mounting Type

Through Hole

Package / Case

8-DIP (0.300, 7.62mm)

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

NO

Number of Pins

8

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

0°C~70°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

JESD-609 Code

e4

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

8

ECCN Code

EAR99

Terminal Position

DUAL

Number of Functions

2

Supply Voltage

15V

Base Part Number

RC4558

Pin Count

a count of all of the component leads (or pins)

8

Power Supplies

an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

+-15V

Number of Channels

2

Operating Supply Current

2.5mA

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

5.6mA

Max Supply Current

5.6mA

Slew Rate

the maximum rate of output voltage change per unit time.

1.7V/μs

Architecture

VOLTAGE-FEEDBACK

Amplifier Type

General Purpose

Common Mode Rejection Ratio

70 dB

Current - Input Bias

150nA

Voltage - Supply, Single/Dual (±)

10V~30V ±5V~15V

Input Offset Voltage (Vos)

6mV

Neg Supply Voltage-Nom (Vsup)

-15V

Unity Gain BW-Nom

3000 kHz

Voltage Gain

109.54dB

Low-Offset

NO

Frequency Compensation

Frequency compensation is implemented by modifying the gain and phase characteristics of the amplifier's open loop output or of its feedback network, or both, in such a way as to avoid the conditions leading to oscillation. This is usually done by the internal or external use of resistance-capacitance networks.

YES

Voltage - Input Offset

500μV

Low-Bias

NO

Micropower

the use of very small electric generators and prime movers or devices to convert heat or motion to electricity, for use close to the generator.

NO

Bias Current-Max (IIB) @25C

0.5μA

Programmable Power

A programmable power supply provides remote control capability of the output voltage(s) via an analog control signal controlled by keypad or rotary switch from the front panel of the power supply or via a computer interface such as RS232, GPIB, or USB.

NO

Dual Supply Voltage

9V

Nominal Gain Bandwidth Product

3MHz

Max I/O Voltage

6mV

Power

NO

Height

5.08mm

Length

9.81mm

Width

6.35mm

Thickness

3.9mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free