Texas Instruments SN65LVDT2DBVR

Lifecycle Status

ACTIVE (Last Updated: 4 days ago)

Factory Lead Time

6 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Gold

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

SC-74A, SOT-753

Number of Pins

5

Weight

13.012431mg

Interface Standards

EIA-644-A; TIA-644-A

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Cut Tape (CT)

Series

65LVDT

JESD-609 Code

e4

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

5

ECCN Code

EAR99

Type

Receiver

Voltage - Supply

2.4V~3.6V

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Supply Voltage

3.3V

Base Part Number

65LVDT2

Pin Count

a count of all of the component leads (or pins)

5

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

3.3V

Operating Supply Current

7mA

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

8mA

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

385mW

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

3.1 ns

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

3.1 ns

Max Output Voltage

The maximum output voltage refers to the dynamic area beyond which the output is saturated in the positive or negative direction, and is limited according to the load resistance value.

454mV

Data Rate

Data Rate is defined as the amount of data transmitted during a specified time period over a network. It is the speed at which data is transferred from one device to another or between a peripheral device and the computer. It is generally measured in Mega bits per second(Mbps) or Mega bytes per second(MBps).

400Mbps

Differential Output

a differential output voltage in electronics is the difference between the values of two AC voltages, 180° out of phase, present at the output terminals of an amplifier when you apply a differential input voltage to the input terminals of an amplifier.

NO

Protocol

LVDS

Input Characteristics

DIFFERENTIAL SCHMITT TRIGGER

Number of Drivers/Receivers

0/1

Driver Number of Bits

1

Max Input Current

20μA

Receive Delay-Max

3.6 ns

Supply Voltage1-Nom

3.3V

Output Low Current-Max

0.008A

Number of Receivers

1

Out Swing-Min

2 V

High Level Input Current-Max

0.00002A

Ambient Temperature Range High

This varies from person to person, but it is somewhere between 68 and 77 degrees F on average. The temperature setting that is comfortable for an individual may fluctuate with humidity and outside temperature as well. The temperature of an air conditioned room can also be considered ambient temperature.

85°C

Height

1.45mm

Length

2.9mm

Width

1.6mm

Thickness

1.2mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free