SN74ALVCH16269DGGR

Texas Instruments SN74ALVCH16269DGGR

Part No:

SN74ALVCH16269DGGR

Manufacturer:

Texas Instruments

Package:

56-TFSOP (0.240, 6.10mm Width)

ROHS:

AINNX NO:

5051312-SN74ALVCH16269DGGR

Description:

IC RGSTRD BUS EXCHANGER 56TSSOP

Products specifications
  • Lifecycle Status
    ACTIVE (Last Updated: 2 days ago)
  • Mount
    Surface Mount
  • Mounting Type
    Surface Mount
  • Package / Case
    56-TFSOP (0.240, 6.10mm Width)
  • Number of Pins
    56
  • Weight
    252.792698mg
  • Number of Elements
    1
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -40°C~85°C
  • Packaging

    Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

    Cut Tape (CT)
  • Series
    74ALVCH
  • JESD-609 Code
    e4
  • Pbfree Code
    yes
  • Part Status

    Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

    Discontinued
  • Moisture Sensitivity Level (MSL)
    1 (Unlimited)
  • Number of Terminations
    56
  • ECCN Code
    EAR99
  • Terminal Finish
    Nickel/Palladium/Gold (Ni/Pd/Au)
  • Packing Method
    TR
  • Voltage - Supply
    1.65V~3.6V
  • Terminal Position
    DUAL
  • Terminal Form

    Occurring at or forming the end of a series, succession, or the like; closing; concluding.

    GULL WING
  • Peak Reflow Temperature (Cel)
    260
  • Number of Functions
    1
  • Supply Voltage
    1.8V
  • Terminal Pitch

    The center distance from one pole to the next.

    0.5mm
  • Base Part Number
    74ALVCH16269
  • Pin Count

    a count of all of the component leads (or pins)

    56
  • Number of Outputs
    12
  • Polarity
    Non-Inverting
  • Supply Voltage-Max (Vsup)
    3.6V
  • Power Supplies

    an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

    3.3V
  • Number of Circuits
    12 ~ 24-Bit
  • Load Capacitance

    the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

    50pF
  • Number of Ports

    A port is identified for each transport protocol and address combination by a 16-bit unsigned number,.

    3
  • Output Current

    The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

    24mA
  • Number of Bits
    24
  • Propagation Delay

    the flight time of packets over the transmission link and is limited by the speed of light.

    6.2 ns
  • Quiescent Current

    The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

    40μA
  • Turn On Delay Time

    Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

    8.2 ns
  • Family
    ALVC/VCX/A
  • Output Characteristics
    3-STATE
  • Logic Type
    Registered Bus Exchanger
  • Nominal Input Voltage

    The actual voltage at which a circuit operates can vary from the nominal voltage within a range that permits satisfactory operation of equipment. The word “nominal” means “named”.

    2V
  • Trigger Type
    POSITIVE EDGE
  • Control Type
    INDEPENDENT CONTROL
  • Power Supply Current-Max (ICC)
    0.04mA
  • Count Direction
    UNIDIRECTIONAL
  • Translation
    N/A
  • Height
    1.2mm
  • Length
    14mm
  • Width
    6.1mm
  • Thickness
    1.15mm
  • Radiation Hardening

    Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

    No
  • RoHS Status

    RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

    ROHS3 Compliant
  • Lead Free
    Lead Free
0 Similar Products Remaining
Documents & Media Download datasheets and manufacturer documentation for Texas Instruments SN74ALVCH16269DGGR.