Texas Instruments SN74HC4066PWR

Lifecycle Status

ACTIVE (Last Updated: 1 day ago)

Factory Lead Time

6 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Gold

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

14-TSSOP (0.173, 4.40mm Width)

Number of Pins

14

Weight

57.209338mg

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

43 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Cut Tape (CT)

JESD-609 Code

e4

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

14

ECCN Code

EAR99

Resistance

150Ohm

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

4

Supply Voltage

4.5V

Base Part Number

74HC4066

Pin Count

a count of all of the component leads (or pins)

14

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

5V

Polarity

Non-Inverting

Number of Channels

4

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

6V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

2V

Operating Supply Current

2μA

Max Supply Current

2μA

Throw Configuration

SPST

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

15 ns

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

38 ns

Supply Type

Single

On-State Resistance (Max)

30Ohm Typ

High Level Output Current

High-level Output Current IOH The current flowing into the output at a specified high- level voltage. Low-level Output Current IOL The current flowing into the output at a specified low- level output voltage.

25mA

Low Level Output Current

The current into the output terminal with input conditions applied that, according to the product specification, will establish a low level at the output.

25mA

Multiplexer/Demultiplexer Circuit

1:1

Off-state Isolation-Nom

42 dB

Current - Leakage (IS(off)) (Max)

100nA

Channel Capacitance (CS(off), CD(off))

0.5pF 9pF

Switch Circuit

establishes connections between links, on demand and as available, in order to establish an end-to-end circuit between devices.

SPST - NO

Switch Time (Ton, Toff) (Max)

31ns, 34ns

Switching

MAKE-BEFORE-BREAK

Switch-on Time-Max

36ns

Voltage - Supply, Single (V+)

2V~6V

Drain to Source Resistance

150Ohm

Normal Position

NO

Height

1.2mm

Length

5mm

Width

4.4mm

Thickness

1mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free