SN74LS590N

Texas Instruments SN74LS590N

Part No:

SN74LS590N

Manufacturer:

Texas Instruments

Datasheet:

-

Package:

16-DIP (0.300, 7.62mm)

ROHS:

AINNX NO:

4759406-SN74LS590N

Description:

TEXAS INSTRUMENTS SN74LS590N8 BIT BINARY COUNTER, DIP-16

Products specifications
  • Lifecycle Status
    ACTIVE (Last Updated: 2 days ago)
  • Factory Lead Time
    6 Weeks
  • Mount
    Through Hole
  • Mounting Type
    Through Hole
  • Package / Case
    16-DIP (0.300, 7.62mm)
  • Number of Pins
    16
  • Weight
    951.693491mg
  • Clock-Edge Trigger Type
    Positive Edge
  • Number of Elements
    1
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    0°C~70°C
  • Packaging

    Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

    Tube
  • Series
    74LS
  • JESD-609 Code
    e4
  • Part Status

    Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

    Active
  • Moisture Sensitivity Level (MSL)
    1 (Unlimited)
  • Number of Terminations
    16
  • ECCN Code
    EAR99
  • Terminal Finish
    Nickel/Palladium/Gold (Ni/Pd/Au)
  • Additional Feature

    Any Feature, including a modified Existing Feature, that is not an Existing Feature.

    TCO OUTPUT; REGISTERED OUTPUTS
  • Voltage - Supply
    4.75V~5.25V
  • Terminal Position
    DUAL
  • Number of Functions
    1
  • Supply Voltage
    5V
  • Terminal Pitch

    The center distance from one pole to the next.

    2.54mm
  • Frequency
    35MHz
  • Base Part Number
    74LS590
  • Pin Count

    a count of all of the component leads (or pins)

    16
  • Operating Supply Voltage

    The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

    5V
  • Power Supplies

    an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

    5V
  • Load Capacitance

    the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

    45pF
  • Nominal Supply Current

    Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

    44mA
  • Output Current

    The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

    2.6mA
  • Propagation Delay

    the flight time of packets over the transmission link and is limited by the speed of light.

    45 ns
  • Turn On Delay Time

    Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

    45 ns
  • Reset
    Asynchronous
  • Family
    LS
  • Logic Function
    Counter
  • Direction
    Up
  • Output Characteristics
    3-STATE
  • Logic Type
    Binary Counter
  • Max I(ol)
    0.024 A
  • Number of Bits per Element
    8
  • Trigger Type
    Positive Edge
  • Power Supply Current-Max (ICC)
    65mA
  • Height
    5.08mm
  • Length
    19.3mm
  • Width
    6.35mm
  • Thickness
    3.9mm
  • REACH SVHC
    No SVHC
  • Radiation Hardening

    Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

    No
  • RoHS Status

    RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

    ROHS3 Compliant
  • Lead Free
    Lead Free
0 Similar Products Remaining
Documents & Media Download datasheets and manufacturer documentation for Texas Instruments SN74LS590N.