Texas Instruments TPS61041DBVR

Lifecycle Status

ACTIVE (Last Updated: 4 days ago)

Factory Lead Time

6 Weeks

Mounting Type

Surface Mount

Package / Case

SC-74A, SOT-753

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

YES

Number of Pins

5

Weight

13.012431mg

SwitchingFrequency

1MHz

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Cut Tape (CT)

JESD-609 Code

e4

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

5

Termination

SMD/SMT

ECCN Code

EAR99

Type

DC DC Regulator

Terminal Finish

Nickel/Palladium/Gold (Ni/Pd/Au)

Applications

Backlight

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Base Part Number

TPS61041

Pin Count

a count of all of the component leads (or pins)

5

Number of Outputs

1

Efficiency

85 %

Output Type

Adjustable

Max Output Current

The maximum current that can be supplied to the load.

50mA

Input Voltage-Nom

2.4V

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

6V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

1.8V

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

250mA

Max Supply Current

50μA

Quiescent Current

The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

28μA

Output Power

That power available at a specified output of a device under specified conditions of operation.

357mW

Max Output Voltage

The maximum output voltage refers to the dynamic area beyond which the output is saturated in the positive or negative direction, and is limited according to the load resistance value.

28V

Topology

Step-Up (Boost)

Min Input Voltage

1.8V

Control Mode

CURRENT-MODE

Max Input Voltage

6V

Control Technique

PULSE FREQUENCY MODULATION

Nominal Input Voltage

The actual voltage at which a circuit operates can vary from the nominal voltage within a range that permits satisfactory operation of equipment. The word “nominal” means “named”.

6V

Min Output Voltage

1.8V

Internal Switch(s)

Yes

High Level Output Current

High-level Output Current IOH The current flowing into the output at a specified high- level voltage. Low-level Output Current IOL The current flowing into the output at a specified low- level output voltage.

50mA

Dimming

PWM

Height

1.45mm

Length

2.9mm

Width

1.6mm

Thickness

1.2mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free