Texas Instruments UCC2804N

Lifecycle Status

ACTIVE (Last Updated: 3 days ago)

Factory Lead Time

6 Weeks

Mount

Through Hole

Mounting Type

Through Hole

Package / Case

8-DIP (0.300, 7.62mm)

Number of Pins

8

Weight

523.190449mg

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

JESD-609 Code

e4

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

8

ECCN Code

EAR99

Terminal Finish

Nickel/Palladium/Gold (Ni/Pd/Au)

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

1W

Terminal Position

DUAL

Number of Functions

1

Supply Voltage

10V

Terminal Pitch

The center distance from one pole to the next.

2.54mm

Frequency

1MHz

Base Part Number

UCC2804

Pin Count

a count of all of the component leads (or pins)

8

Number of Outputs

1

Output Voltage

1V

Input Voltage-Nom

10V

Analog IC - Other Type

SWITCHING CONTROLLER

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

500μA

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

1A

Voltage - Supply (Vcc/Vdd)

8.3V~12V

Control Features

Frequency Control

Input Voltage (Min)

9V

Topology

Boost, Flyback, Forward

Control Mode

CURRENT-MODE

Frequency - Switching

Up to 1MHz

Control Technique

PULSE WIDTH MODULATION

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

41ns

Supply Current-Max (Isup)

25mA

Fall Time (Typ)

44 ns

Switcher Configuration

SINGLE

Internal Switch(s)

No

Fault Protection

Protection against electric shock under. single fault conditions.

Current Limiting

Max Duty Cycle

50 %

Duty Cycle

the percentage of the ratio of pulse duration, or pulse width (PW) to the total period (T) of the waveform.

49%

Voltage - Start Up

12.5V

Height

5.08mm

Length

9.81mm

Width

6.35mm

Thickness

3.9mm

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free