Toshiba TC74HC368AFN

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

YES

Number of Pins

16

Operating Temperature (Max.)

85°C

Operating Temperature (Min.)

-40°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel

JESD-609 Code

e0

Number of Terminations

16

Additional Feature

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

ONE FUNCTION WITH TWO BITS

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Number of Functions

2

Supply Voltage

4.5V

Terminal Pitch

The center distance from one pole to the next.

1.27mm

Pin Count

a count of all of the component leads (or pins)

16

Polarity

Inverting

Supply Voltage-Max (Vsup)

6V

Power Supplies

an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

2/6V

Temperature Grade

Temperature grades represent a tire's resistance to heat and its ability to dissipate heat when tested under controlled laboratory test conditions.

INDUSTRIAL

Supply Voltage-Min (Vsup)

2V

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

150pF

Number of Ports

A port is identified for each transport protocol and address combination by a 16-bit unsigned number,.

2

Number of Bits

4

Family

HC/UH

Logic Function

Buffer

Output Characteristics

3-STATE

Logic IC Type

BUS DRIVER

Max I(ol)

0.006 A

Prop. Delay@Nom-Sup

24 ns

Control Type

ENABLE LOW

Length

9.9mm

Height Seated (Max)

1.75mm

Width

3.9mm

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant