Trinamic Motion Control GmbH QSH4218-35-10-027

Factory Lead Time

8 Weeks

Weight

0.485lb 219.99g

Mounting Hole Spacing

The holes in the mounting brackets are spaced at 1 U (1.75 in. or 4.45 cm), so the router can be mounted in any rack that provides holes spaced at that distance.

1.220 (30.99mm)

CoilResistance

5.3Ohm

Voltage Rated

RATED voltage is the voltage on the nameplate - the "design point" for maximum power throughput and safe thermal operation.

5.3VDC

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-20°C~50°C

Series

QMot QSH4218

Published

2006

Size / Dimension

Square - 1.665 x 1.665 42.30mmx42.30mm

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Termination

Wire Leads

Type

Hybrid

Resistance

5.3Ohm

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

1A

Termination Style

Wire Leads

Approval Agency

CE

Inductance

6.6 mH

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

1A

Accuracy

±5%

Coil Type

There are 2 different types of 'coil'; one has copper on it (IUD) and the other contains hormone (Mirena IUS). Both are over 99% effective at protecting against pregnancy.

Bipolar

Coil Voltage (DC)

40V

Step Angle

the angle at which the rotor of a stepper motor moves when one pulse is applied to the input of the stator.

1.8°

Steps per Revolution

200

Torque - Holding (oz-in / mNm)

38.2 / 270

Features

Flatted Shaft

NEMA Frame Size

NEMA (National Electrical Manufacturers Association) frame size refers to mounting only and has no direct bearing on the motor body diameter. In any standard frame number designation there are either two or three numbers.

17

Rotor Inertia

35gcm2

Diameter - Shaft

0.197 (5.00mm)

Length - Shaft and Bearing

0.945 24.00mm

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant