DG442BDY

Vishay DG442BDY

Part No:

DG442BDY

Manufacturer:

Vishay

Datasheet:

-

Package:

-

AINNX NO:

69829417-DG442BDY

Description:

Analog Switch Quad SPST 16-Pin SOIC N

Products specifications
  • Mount
    Surface Mount
  • Number of Pins
    16
  • Weight
    665.986997 mg
  • Case/Package
    SOIC
  • RoHS
    Compliant
  • Turn Off Delay Time

    It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

    120 ns
  • Resistance
    80 Ω
  • Max Operating Temperature

    The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

    85 °C
  • Min Operating Temperature
    -40 °C
  • Max Power Dissipation

    The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

    900 mW
  • Number of Outputs
    4
  • Number of Channels
    4
  • Number of Circuits
    4
  • Max Supply Voltage

    In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

    25 V
  • Min Supply Voltage

    The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

    13 V
  • Power Dissipation

    the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

    900 mW
  • Max Supply Current
    1 µA
  • Turn On Delay Time

    Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

    220 ns
  • Number of Inputs
    4
  • Supply Type
    Dual, Single
  • Max Dual Supply Voltage

    A Dual power supply is a regular direct current power supply. It can provide a positive as well as negative voltage. It ensures stable power supply to the device as well as it helps to prevent system damage.

    22 V
  • Min Dual Supply Voltage
    7 V
  • Dual Supply Voltage
    15 V
  • Height
    1.55 mm
  • Length
    10 mm
  • Width
    4 mm
0 Similar Products Remaining