Vishay LH1540AT

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mount

PCB, Through Hole

Number of Pins

6

Approvals

UL

Case/Package

PDIP

RoHS

Compliant

Schedule B

8536410030, 8536410030|8536410030|8536410030|8536410030|8536410030

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

700 µs

Termination

PC Pin

Resistance

20 Ω

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

85 °C

Min Operating Temperature

-40 °C

Capacitance

1.1 pF

Depth

6.5 mm

Output Voltage

350 V

Max Output Current

The maximum current that can be supplied to the load.

120 mA

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

600 mW

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

120 mA

Throw Configuration

SPST

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

1.4 ms

Forward Current

Current which flows upon application of forward voltage.

1 mA

Max Output Voltage

The maximum output voltage refers to the dynamic area beyond which the output is saturated in the positive or negative direction, and is limited according to the load resistance value.

350 V

Max Input Voltage

1.45 V

Relay Type

Relay

Forward Voltage

the amount of voltage needed to get current to flow across a diode.

1.26 V

Max Input Current

50 mA

Input Current

50 mA

Load Current

The Load Current can be defined as 1) Full load current the maximum current that an electrical machine can operate; 2) Rated Current the current rated on the nameplate of an electrical machine; 3) Nominal Current is generally mentioned in the specification documents that is normally the same value as the rated one.

120 mA

Isolation Voltage

Isolation voltage refers to a test of the ability of an insulator to minimize the flow of electric current with a high applied voltage.

5.3 kV

Height

3.81 mm

Length

8.7 mm

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

REACH SVHC

Unknown

Lead Free

Lead Free