Vishay Semiconductor Opto Division TCMD4000

Factory Lead Time

15 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

16-SOIC (0.173, 4.40mm Width)

Number of Pins

16

Collector-Emitter Breakdown Voltage

35V

Current Transfer Ratio-Min

600% @ 1mA

Number of Elements

4

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

250 μs

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~100°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Cut Tape (CT)

Published

2009

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

ECCN Code

EAR99

Voltage - Rated DC

1.25V

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

250mW

Voltage - Isolation

3750Vrms

Output Voltage

35V

Output Type

Darlington

Number of Channels

4

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

250mW

Input Type

DC

Forward Current

Current which flows upon application of forward voltage.

60mA

Max Output Voltage

The maximum output voltage refers to the dynamic area beyond which the output is saturated in the positive or negative direction, and is limited according to the load resistance value.

35V

Output Current per Channel

80mA

Collector Emitter Voltage (VCEO)

35V

Max Collector Current

80mA

Rise / Fall Time (Typ)

300μs -

Reverse Breakdown Voltage

6V

Reverse Voltage

the voltage drop across the diode if the voltage at the cathode is more positive than the voltage at the anode

6V

Max Input Current

60mA

Input Current

60mA

Turn On / Turn Off Time (Typ)

-, 250μs

Max Junction Temperature (Tj)

125°C

Vce Saturation (Max)

1V

Reverse Voltage (DC)

6V

Ambient Temperature Range High

This varies from person to person, but it is somewhere between 68 and 77 degrees F on average. The temperature setting that is comfortable for an individual may fluctuate with humidity and outside temperature as well. The temperature of an air conditioned room can also be considered ambient temperature.

100°C

Current Transfer Ratio

Current Transfer Ratio (CTR) is the gain of the optocoupler. It is the ratio of the phototransistor collector current to the IRED forward current. CTR = (IC / IF) * 100 It is expressed as a percentage (%).

800 %

Height

2.1mm

Length

10.12mm

Width

4.4mm

REACH SVHC

Unknown

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free