Vishay Siliconix SI9110DJ-E3

Mount

Through Hole

Mounting Type

Surface Mount

Package / Case

14-DIP (0.300, 7.62mm)

Number of Pins

14

Weight

1.620005g

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Published

2012

JESD-609 Code

e3

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Obsolete

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

14

ECCN Code

EAR99

Terminal Finish

Matte Tin (Sn)

Terminal Position

DUAL

Peak Reflow Temperature (Cel)

260

Terminal Pitch

The center distance from one pole to the next.

2.54mm

Frequency

3MHz

Time@Peak Reflow Temperature-Max (s)

30

Base Part Number

SI9110

Function

Step-Up/Step-Down

Number of Outputs

1

Output Voltage

9.7V

Output Type

Transistor Driver

Max Output Current

The maximum current that can be supplied to the load.

150μA

Input Voltage-Nom

48V

Analog IC - Other Type

SWITCHING CONTROLLER

Output Configuration

Positive

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

750mW

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

10mA

Voltage - Supply (Vcc/Vdd)

9.5V~13.5V

Control Features

Enable, Reset

Topology

Cuk, Flyback, Forward Converter, Push-Pull

Control Mode

CURRENT-MODE

Frequency - Switching

40kHz~1MHz

Control Technique

PULSE WIDTH MODULATION

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

40ns

Synchronous Rectifier

Synchronous rectification is a technique for improving the efficiency of rectification by replacing diodes with actively controlled switches, usually power MOSFETs or power bipolar junction transistors (BJT).

No

Fall Time (Typ)

40 ns

Nominal Input Voltage

The actual voltage at which a circuit operates can vary from the nominal voltage within a range that permits satisfactory operation of equipment. The word “nominal” means “named”.

120V

Switcher Configuration

SINGLE

Max Duty Cycle

50 %

Duty Cycle

the percentage of the ratio of pulse duration, or pulse width (PW) to the total period (T) of the waveform.

50 %

Height

3.81mm

Length

19.3mm

Width

7.11mm

REACH SVHC

Unknown

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free