Vishay Siliconix SIP32413DNP-T1-GE4

Factory Lead Time

14 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

8-UFDFN Exposed Pad

Number of Pins

8

Weight

50.008559mg

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

1 μs

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~125°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Published

2017

JESD-609 Code

e4

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

8

ECCN Code

EAR99

Resistance

76mOhm

Terminal Finish

PALLADIUM GOLD OVER NICKEL

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

580mW

Terminal Position

DUAL

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Terminal Pitch

The center distance from one pole to the next.

0.5mm

Time@Peak Reflow Temperature-Max (s)

30

Base Part Number

SIP32413

Pin Count

a count of all of the component leads (or pins)

8

Number of Outputs

2

Output Voltage

5V

Output Type

N-Channel

Max Output Current

The maximum current that can be supplied to the load.

2.4A

Input Voltage-Nom

5V

Interface

On/Off

Analog IC - Other Type

DUAL SWITCHING CONTROLLER

Output Configuration

High Side

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

580mW

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

2A

Voltage - Supply (Vcc/Vdd)

Not Required

Input Type

Non-Inverting

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

210 μs

Switch Type

Based on their characteristics, there are basically three types of switches: Linear switches, tactile switches and clicky switches.

General Purpose

Nominal Input Voltage

The actual voltage at which a circuit operates can vary from the nominal voltage within a range that permits satisfactory operation of equipment. The word “nominal” means “named”.

5.5V

Ratio - Input:Output

1:1

Voltage - Load

1.1V~5.5V

Fault Protection

Protection against electric shock under. single fault conditions.

Reverse Current

Rds On (Typ)

62m Ω

Features

Slew Rate Controlled

Height Seated (Max)

0.6mm

REACH SVHC

Unknown

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant