Vishay Siliconix SIP4282DVP3-T1GE3

Factory Lead Time

14 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

PowerPAK® SC-75-6L

Number of Pins

6

Weight

95.991485mg

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

4 μs

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~125°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Published

2013

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

6

ECCN Code

EAR99

Resistance

480mOhm

Terminal Finish

Pure Matte Tin (Sn)

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

610mW

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

NO LEAD

Peak Reflow Temperature (Cel)

260

Terminal Pitch

The center distance from one pole to the next.

0.5mm

Reach Compliance Code

unknown

Time@Peak Reflow Temperature-Max (s)

30

Pin Count

a count of all of the component leads (or pins)

6

Number of Outputs

1

Qualification Status

An indicator of formal certification of qualifications.

Not Qualified

Output Type

P-Channel

Max Output Current

The maximum current that can be supplied to the load.

1.4A

Power Supplies

an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

2/5V

Interface

On/Off

Output Configuration

High Side

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

610mW

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

1.2A

Voltage - Supply (Vcc/Vdd)

Not Required

Input Type

Non-Inverting

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

20 μs

Switch Type

Based on their characteristics, there are basically three types of switches: Linear switches, tactile switches and clicky switches.

General Purpose

Ratio - Input:Output

1:1

Voltage - Load

1.8V~5.5V

Driver Number of Bits

1

Fault Protection

Protection against electric shock under. single fault conditions.

UVLO

Rds On (Typ)

105m Ω

Features

Load Discharge, Slew Rate Controlled

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant