Analog Devices Inc. AD8564ARZ

Lifecycle Status

PRODUCTION (Last Updated: 2 weeks ago)

Factory Lead Time

8 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mounting Type

Surface Mount

Package / Case

16-SOIC (0.154, 3.90mm Width)

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

YES

Number of Pins

16

Number of Elements

4

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

JESD-609 Code

e3

Pbfree Code

no

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

16

ECCN Code

EAR99

Type

General Purpose

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

150mW

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

4

Supply Voltage

5V

Terminal Pitch

The center distance from one pole to the next.

1.27mm

Time@Peak Reflow Temperature-Max (s)

30

Base Part Number

AD8564

Pin Count

a count of all of the component leads (or pins)

16

Output Type

CMOS, TTL

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

5V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

-5V

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

7mA

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

150mW

Max Supply Current

7mA

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

9.8 ns

Quiescent Current

The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

7mA

Response Time

the time taken for a circuit or measuring device, when subjected to a change in input signal, to change its state by a specified fraction of its total response to that change.

8 ns

Common Mode Rejection Ratio

85 dB

Output Current per Channel

40mA

Input Offset Voltage (Vos)

3mV

Neg Supply Voltage-Nom (Vsup)

-5V

Voltage Gain

69.54dB

Average Bias Current-Max (IIB)

9μA

Power Supply Rejection Ratio (PSRR)

80dB

Max Dual Supply Voltage

A Dual power supply is a regular direct current power supply. It can provide a positive as well as negative voltage. It ensures stable power supply to the device as well as it helps to prevent system damage.

17V

Max Input Current

4μA

Dual Supply Voltage

5V

Input Bias Current

4μA

Neg Supply Voltage-Max (Vsup)

-7V

Current - Quiescent (Max)

14mA 14mA 7mA

Voltage - Input Offset (Max)

7mV @ 5V

Current - Input Bias (Max)

4μA @ 5V

CMRR, PSRR (Typ)

85dB CMRR, 80dB PSRR

Height

1.5mm

Length

10mm

Width

4mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Contains Lead