Analog Devices Inc. ADCMP562BRQ

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Lead, Tin

Mounting Type

Surface Mount

Package / Case

20-SSOP (0.154, 3.90mm Width)

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

YES

Number of Pins

20

Number of Elements

2

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

JESD-609 Code

e0

Pbfree Code

no

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Obsolete

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

20

ECCN Code

EAR99

Type

with Latch

Terminal Finish

Tin/Lead (Sn85Pb15)

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

160mW

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

240

Number of Functions

1

Supply Voltage

5V

Terminal Pitch

The center distance from one pole to the next.

0.635mm

Reach Compliance Code

not_compliant

Time@Peak Reflow Temperature-Max (s)

20

Base Part Number

ADCMP562

Pin Count

a count of all of the component leads (or pins)

20

Qualification Status

An indicator of formal certification of qualifications.

Not Qualified

Output Type

Complementary, Differential, Open-Emitter, PECL

Operating Supply Current

23mA

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

23mA

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

160mW

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

30mA

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

830 ps

Quiescent Current

The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

13mA

Response Time

the time taken for a circuit or measuring device, when subjected to a change in input signal, to change its state by a specified fraction of its total response to that change.

0.7 ns

Common Mode Rejection Ratio

80 dB

Voltage - Supply, Single/Dual (±)

±4.75V~5.25V

Input Offset Voltage (Vos)

3mV

Neg Supply Voltage-Nom (Vsup)

-5.2V

Voltage Gain

70dB

Average Bias Current-Max (IIB)

10μA

Power Supply Rejection Ratio (PSRR)

85dB

Supply Voltage Limit-Max

6V

Max Input Current

3μA

Input Bias Current

3μA

Neg Supply Voltage-Max (Vsup)

-6V

Current - Quiescent (Max)

5mA 28mA 13mA

Voltage - Input Offset (Max)

2mV @ -5.2V5V

Current - Input Bias (Max)

3μA @ -5.2V5V

Hysteresis

±1mV

CMRR, PSRR (Typ)

80dB CMRR, 85dB PSRR

Propagation Delay (Max)

0.83ns

Length

8.6614mm

Width

3.9116mm

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

Non-RoHS Compliant

Lead Free

Contains Lead