Analog Devices Inc. ADG936BCPZ

Lifecycle Status

PRODUCTION (Last Updated: 2 weeks ago)

Factory Lead Time

8 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mount

Surface Mount

Package / Case

20-WFQFN Exposed Pad, CSP

Number of Pins

20

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

10 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tray

JESD-609 Code

e3

Pbfree Code

no

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

3 (168 Hours)

Number of Terminations

20

ECCN Code

EAR99

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

2.75μW

Voltage - Supply

1.65V~2.75V

Terminal Position

QUAD

Peak Reflow Temperature (Cel)

260

Number of Functions

2

Supply Voltage

2.5V

Terminal Pitch

The center distance from one pole to the next.

0.5mm

Frequency

2GHz

Time@Peak Reflow Temperature-Max (s)

40

Base Part Number

ADG936

Pin Count

a count of all of the component leads (or pins)

20

Number of Outputs

2

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

2.75V

Circuit

2 x SPDT

Supply Voltage-Min (Vsup)

1.65V

Number of Channels

1

Interface

Parallel

Test Frequency

a statistical procedure for assessing data that contain counts or the numbers of occurrences of various categories or classes.

1GHz

Impedance

In electrical engineering, impedance is the opposition to alternating current presented by the combined effect of resistance and reactance in a circuit.

50Ohm

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

2.75μW

Throw Configuration

SPDT

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

11 ns

Topology

Absorptive

-3db Bandwidth

4 GHz

Frequency Range

A continuous range or spectrum of frequencies that extends from one limiting frequency to another.

DC~2GHz

Insertion Loss

the loss of signal power resulting from the insertion of a device in a transmission line or optical fiber and is usually expressed in decibels (dB).

0.9dB

Off-state Isolation-Nom

36 dB

Isolation

36dB

Insertion Loss (dB)

0.4 dB

RF Type

The rate of oscillation of electromagnetic radio waves in the range of 3 kHz to 3 GHz, as well as the alternating currents carrying the radio signals.

General Purpose

Switch-on Time-Max

14ns

Switch-off Time-Max

13ns

P1dB

16dBm

IIP3

32dBm

Height

830μm

Length

4mm

Width

4mm

Thickness

850μm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Contains Lead