PSL60E24RP

Cutler Hammer PSL60E24RP

Part No:

PSL60E24RP

Manufacturer:

Cutler Hammer

Datasheet:

-

Package:

-

AINNX NO:

35975073-PSL60E24RP

Description:

Cutler Hammer, Div of Eaton Co Power Supplies, PSL Series

Products specifications
  • Voltage Rated

    RATED voltage is the voltage on the nameplate - the "design point" for maximum power throughput and safe thermal operation.

    10 V ~ 32 V
  • Manufacturer Part Number
    PSL60E24RP
  • Approvals
    CE, cULus
  • Input Frequency

    The Input Frequency refers to the frequency that mobiles and portables transmit on to access a Repeater.

    47-63 Hz
  • Manufacturer
    Cutler Hammer, Div of Eaton Co
  • RoHS
    Yes
  • Power Factor Correction
    No
  • Mounting
    DIN Rail
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -40°C ~ 65°C (TA)
  • Series
    4-20HR-MaxSonar-WR
  • Packaging

    Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

    Bulk
  • Part Status

    Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

    Active
  • Frequency
    42kHz
  • Number of Outputs
    1
  • Output Current

    The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

    2.5 A
  • Power
    60 W
  • Overload Protection

    Overload protection is a protection against a running overcurrent that would cause overheating of the protected equipment. Hence, an overload is also type of overcurrent. Overload protection typically operates on an inverse time curve where the tripping time becomes less as the current increases.

    Yes
  • Beam Angle

    The beam angle of a lamp is the angle at which the light is distributed or emitted.

    23°
  • Nominal Input Voltage (AC)
    120 VAC, 208 VAC, 240 VAC
0 Similar Products Remaining