TMRD1UN

Cutler Hammer TMRD1UN

Part No:

TMRD1UN

Manufacturer:

Cutler Hammer

Datasheet:

-

Package:

8-SOIC (0.154, 3.90mm Width) Exposed Pad

AINNX NO:

40562132-TMRD1UN

Description:

Cutler Hammer, Div of Eaton Co Relays, TR Series

Products specifications
  • Mounting Type
    Surface Mount
  • Package / Case
    8-SOIC (0.154, 3.90mm Width) Exposed Pad
  • Supplier Device Package
    8-SOIC-EP
  • Logic voltage-VIL, VIH
    1.22V, 2.08V
  • Driver Configuration
    Low-Side
  • Manufacturer
    Cutler Hammer, Div of Eaton Co
  • Timing Range
    0
  • Manufacturer Part Number
    TMRD1UN
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -40°C ~ 125°C (TJ)
  • Series
    --
  • Packaging

    Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

    Tape & Reel (TR)
  • Part Status

    Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

    Obsolete
  • Termination
    Screw Terminals
  • Voltage - Supply
    4.5 V ~ 16 V
  • Base Part Number
    ISL89167
  • Input Type
    Inverting
  • Coil Voltage
    12-240 VAC, 12-240 VDC
  • Rise / Fall Time (Typ)
    20ns, 20ns
  • Channel Type
    Independent
  • Number of Drivers
    2
  • Gate Type
    N-Channel MOSFET
  • Current - Peak Output (Source, Sink)
    6A, 6A
  • Mode of Operation

    There are 5 types of mode of operation, Electronic CodeBook (ECB), Cipher Block Chaining (CBC), Cipher feedback (CFB), Output Feedback (OFB), Counter Mode (CTR).

    Memory Latch, Off Delay, On Delay, One-Shot, Pulse Generator, Repeat Cycle
  • Contacts
    SPDT
  • IP Rating

    IP (or "Ingress Protection") ratings are defined in international standard EN 6529 (British BS EN 6529:1992, European IEC 659:1989). They are?used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies?(tools, dirt etc) and moisture.

    IP40
0 Similar Products Remaining