Diodes Incorporated BSS138DW-7-F

Factory Lead Time

15 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

6-TSSOP, SC-88, SOT-363

Number of Pins

6

Supplier Device Package

SOT-363

Weight

6.010099mg

Current - Continuous Drain (Id) @ 25℃

200mA

Number of Elements

2

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

20 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C~150°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Published

2012

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

6

Resistance

3.5Ohm

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

150°C

Min Operating Temperature

-55°C

Voltage - Rated DC

50V

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

200mW

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

200mA

Number of Channels

2

Element Configuration

The distribution of electrons of an atom or molecule (or other physical structure) in atomic or molecular orbitals.

Dual

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

200mW

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

20 ns

Power - Max

200mW

FET Type

2 N-Channel (Dual)

Rds On (Max) @ Id, Vgs

3.5Ohm @ 220mA, 10V

Vgs(th) (Max) @ Id

1.5V @ 250μA

Input Capacitance (Ciss) (Max) @ Vds

50pF @ 10V

Drain to Source Voltage (Vdss)

50V

Continuous Drain Current (ID)

200mA

Threshold Voltage

1.2V

Gate to Source Voltage (Vgs)

20V

Drain to Source Breakdown Voltage

75V

Input Capacitance

The capacitance between the input terminals of an op amp with either input grounded. It is expressed in units of farads.

50pF

Max Junction Temperature (Tj)

150°C

FET Feature

Logic Level Gate

Drain to Source Resistance

3.5Ohm

Rds On Max

3.5 Ω

Nominal Vgs

1.2 V

Min Breakdown Voltage

50V

Height

1.1mm

Length

2.2mm

Width

1.35mm

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free