XRP2523ISTR-F
SOT-23
19176764-XRP2523ISTR-F
MAX LINEAR - XRP2523ISTR-F.. - USB 3.0 Power Distribution Switch, High Side, Active High, 1 Output, 6.5V, 1.5A, SOT-23-5
It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.
The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.
Occurring at or forming the end of a series, succession, or the like; closing; concluding.
Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.
The maximum current that can be supplied to the load.
The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.
an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?
Temperature grades represent a tire's resistance to heat and its ability to dissipate heat when tested under controlled laboratory test conditions.
Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.
The actual voltage at which a circuit operates can vary from the nominal voltage within a range that permits satisfactory operation of equipment. The word “nominal” means “named”.
Protection against electric shock under. single fault conditions.
Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.
RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.