IXYS Integrated Circuits Division IXDI602PI

Factory Lead Time

8 Weeks

Mount

Through Hole

Mounting Type

Through Hole

Package / Case

8-DIP (0.300, 7.62mm)

Number of Pins

8

Supplier Device Package

8-DIP

Driver Configuration

Low-Side

Logic voltage-VIL, VIH

0.8V 3V

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C~150°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Published

2011

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

125°C

Min Operating Temperature

-40°C

Voltage - Supply

4.5V~35V

Number of Outputs

2

Max Output Current

The maximum current that can be supplied to the load.

2A

Number of Channels

2

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

35V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

4.5V

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

60 ns

Input Type

Inverting

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

15ns

Fall Time (Typ)

15 ns

Rise / Fall Time (Typ)

7.5ns 6.5ns

Channel Type

Independent

Number of Drivers

2

Gate Type

IGBT, N-Channel, P-Channel MOSFET

Current - Peak Output (Source, Sink)

2A 2A

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant