ON Semiconductor MOCD213R2M

Lifecycle Status

ACTIVE (Last Updated: 1 week ago)

Factory Lead Time

5 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

8-SOIC (0.154, 3.90mm Width)

Number of Pins

8

Weight

252mg

Current Transfer Ratio-Min

100% @ 10mA

Number of Elements

2

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

5.7 μs

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~100°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Published

2004

JESD-609 Code

e3

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

ECCN Code

EAR99

Additional Feature

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

UL APPROVED

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

250mW

Voltage - Isolation

2500Vrms

Output Voltage

120V

Output Type

Transistor

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

240mW

Voltage - Forward (Vf) (Typ)

1.25V

Input Type

DC

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

7.5 μs

Forward Current

Current which flows upon application of forward voltage.

60mA

Max Output Voltage

The maximum output voltage refers to the dynamic area beyond which the output is saturated in the positive or negative direction, and is limited according to the load resistance value.

70V

Output Current per Channel

150mA

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

1.6μs

Fall Time (Typ)

2.2 μs

Collector Emitter Voltage (VCEO)

70V

Max Collector Current

150mA

Rise / Fall Time (Typ)

1.6μs 2.2μs

Reverse Breakdown Voltage

6V

Reverse Voltage

the voltage drop across the diode if the voltage at the cathode is more positive than the voltage at the anode

6V

Forward Voltage-Max

1.55V

Max Input Current

60mA

Input Current

60mA

On-State Current-Max

0.15A

Turn On / Turn Off Time (Typ)

3μs, 2.8μs

Max Junction Temperature (Tj)

125°C

Ambient Temperature Range High

This varies from person to person, but it is somewhere between 68 and 77 degrees F on average. The temperature setting that is comfortable for an individual may fluctuate with humidity and outside temperature as well. The temperature of an air conditioned room can also be considered ambient temperature.

100°C

Current Transfer Ratio

Current Transfer Ratio (CTR) is the gain of the optocoupler. It is the ratio of the phototransistor collector current to the IRED forward current. CTR = (IC / IF) * 100 It is expressed as a percentage (%).

100%

Dark Current-Max

50nA

Height

3.63mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free