STMicroelectronics TL072IDT

Lifecycle Status

ACTIVE (Last Updated: 6 months ago)

Factory Lead Time

10 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

8-SOIC (0.154, 3.90mm Width)

Number of Pins

8

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~125°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Cut Tape (CT)

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

8

ECCN Code

EAR99

Terminal Finish

NICKEL/PALLADIUM/GOLD (NI/PD/AU)

Packing Method

TAPE AND REEL

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

2

Supply Voltage

15V

Time@Peak Reflow Temperature-Max (s)

30

Base Part Number

TL072

Pin Count

a count of all of the component leads (or pins)

8

Number of Channels

2

Operating Supply Current

1.4mA

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

2.5mA

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

40mA

Min Input Voltage

-12V

Slew Rate

the maximum rate of output voltage change per unit time.

16V/μs

Architecture

VOLTAGE-FEEDBACK

Amplifier Type

J-FET

Common Mode Rejection Ratio

80 dB

Current - Input Bias

20pA

Max Input Voltage

15V

Voltage - Supply, Single/Dual (±)

6V~36V ±3V~18V

Output Current per Channel

40mA

Input Offset Voltage (Vos)

10mV

Neg Supply Voltage-Nom (Vsup)

-15V

Unity Gain BW-Nom

4000 kHz

Voltage Gain

106.02dB

Low-Offset

NO

Frequency Compensation

Frequency compensation is implemented by modifying the gain and phase characteristics of the amplifier's open loop output or of its feedback network, or both, in such a way as to avoid the conditions leading to oscillation. This is usually done by the internal or external use of resistance-capacitance networks.

YES

Voltage - Input Offset

3mV

Low-Bias

YES

Max Frequency

100kHz

Dual Supply Voltage

15V

Input Offset Current-Max (IIO)

0.004μA

Height

1.25mm

Length

5mm

Width

4mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free