STMicroelectronics TS941ID

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

8-SOIC (0.154, 3.90mm Width)

Number of Pins

8

Number of Elements

1

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

JESD-609 Code

e4

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Obsolete

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

8

ECCN Code

EAR99

Terminal Finish

Nickel/Palladium/Gold (Ni/Pd/Au)

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Supply Voltage

3V

Time@Peak Reflow Temperature-Max (s)

30

Base Part Number

TS941

Pin Count

a count of all of the component leads (or pins)

8

Output Type

Rail-to-Rail

Power Supplies

an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

3/5V

Operating Supply Current

1.2μA

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

1.85μA

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

650μA

Slew Rate

the maximum rate of output voltage change per unit time.

0.0045V/μs

Architecture

VOLTAGE-FEEDBACK

Amplifier Type

General Purpose

Common Mode Rejection Ratio

60 dB

Current - Input Bias

1pA

Voltage - Supply, Single/Dual (±)

2.5V~10V

Output Current per Channel

5mA

Input Offset Voltage (Vos)

10mV

Gain Bandwidth Product

The gain–bandwidth product (designated as GBWP, GBW, GBP, or GB) for an amplifier is the product of the amplifier's bandwidth and the gain at which the bandwidth is measured.

10kHz

Unity Gain BW-Nom

10 kHz

Voltage Gain

100dB

Low-Offset

NO

Frequency Compensation

Frequency compensation is implemented by modifying the gain and phase characteristics of the amplifier's open loop output or of its feedback network, or both, in such a way as to avoid the conditions leading to oscillation. This is usually done by the internal or external use of resistance-capacitance networks.

YES

Low-Bias

YES

Micropower

the use of very small electric generators and prime movers or devices to convert heat or motion to electricity, for use close to the generator.

YES

Programmable Power

A programmable power supply provides remote control capability of the output voltage(s) via an analog control signal controlled by keypad or rotary switch from the front panel of the power supply or via a computer interface such as RS232, GPIB, or USB.

NO

Wideband

NO

Power

NO

Length

4.9mm

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant