Texas Instruments SN74HC4852PWR

Lifecycle Status

ACTIVE (Last Updated: 5 days ago)

Factory Lead Time

6 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Gold

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

16-TSSOP (0.173, 4.40mm Width)

Number of Pins

16

Weight

61.887009mg

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

100 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

JESD-609 Code

e4

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

16

ECCN Code

EAR99

Resistance

195Ohm

Packing Method

TR

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

2

Supply Voltage

3V

Time@Peak Reflow Temperature-Max (s)

NOT SPECIFIED

Base Part Number

74HC4852

Pin Count

a count of all of the component leads (or pins)

16

Number of Outputs

4

Qualification Status

An indicator of formal certification of qualifications.

Not Qualified

Number of Circuits

2

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

6V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

2V

Operating Supply Current

2μA

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

50pF

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

2μA

Number of Bits

4

Throw Configuration

4PST

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

33 ns

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

47.5 ns

Family

HC/UH

Logic Function

Demultiplexer, Multiplexer

Number of Inputs

8

Output Characteristics

3-STATE

Supply Type

Single

Output Polarity

TRUE

Logic IC Type

MULTIPLEXER AND DEMUX/DECODER

On-State Resistance (Max)

195Ohm

High Level Output Current

High-level Output Current IOH The current flowing into the output at a specified high- level voltage. Low-level Output Current IOL The current flowing into the output at a specified low- level output voltage.

25mA

Low Level Output Current

The current into the output terminal with input conditions applied that, according to the product specification, will establish a low level at the output.

25mA

Multiplexer/Demultiplexer Circuit

4:1

Power Supply Current-Max (ICC)

0.01mA

Current - Leakage (IS(off)) (Max)

200nA

Channel Capacitance (CS(off), CD(off))

22pF

Switch Circuit

establishes connections between links, on demand and as available, in order to establish an end-to-end circuit between devices.

SP4T

Switch Time (Ton, Toff) (Max)

39ns, 78ns

Channel-to-Channel Matching (ΔRon)

3 Ω

Voltage - Supply, Single (V+)

2V~6V

Height

1.2mm

Length

5mm

Width

4.4mm

Thickness

1mm

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free